Suzuki SWIFT 2022 Series User Manual

2-110
BEFORE DRIVING
80SS5-01E
Fuel reset
(Average fuel consumption reset set-
ting)
You can change when the value of aver-
age fuel consumption is reset.
Temperature
(Temperature unit setting)
You can change the units that temperature
is displayed in.
• To change the temperature unit, select
“Temperature” in “Setting mode”. Then,
select “°C” or “°F”.
NOTE:
When you change the units that tempera-
ture is displayed in, the automatic heating
and air conditioning system temperature
display units will be changed automatically.
Clock setting
(Adjusting the clock)
• Adjust the clock by selecting “Clock set-
ting” in “Setting mode”. Then, select
“Adjust clock”.
• To change the hour indication, turn the
indicator selector knob (3) left or right
repeatedly when the hour indication
blinks. To change the hour indication
quickly, turn and hold the indicator selec-
tor knob (3). To set the hour indication,
push the indicator selector knob (3) and
the minute indication blinks.
• To change the minute indication, turn the
indicator selector knob (3) left or right
repeatedly when the minute indication
blinks. To change the minute indication
quickly, turn and hold the indicator selec-
tor knob (3). To set the minute indication,
push the indicator selector knob (3).
(Selecting 12H / 24H format)
• Switch the time indication between 12-
hour and 24-hour format by selecting
“Clock setting” in “Setting mode”. Then,
select “12H” or “24H”.
(Adjusting the date)
• Adjust the date by selecting “Clock set-
ting” in “Setting mode”. Then select
“Adjust date”.
• To adjust year, month and day, operate
the indicator selector knob (3) in the
same way as adjusting the clock.
Door lock
(Door lock setting)
You can choose either once or twice oper-
ation(s) to unlock all doors (including the
tailgate) or release the dead lock system (if
equipped) by turning the key, or operating
keyless push start system remote control-
ler or request switch.
You can also turn off or on the buzzer
sound when the door(s) is (are) locked or
unlocked.
Lights
(Lane change setting)
The turn signal and its indicator can be set
whether they flash three times even if you
return the turn signal control lever shortly
after operating it.
• To change the lane change setting,
select “Lane Change” in “Setting mode”.
Then, select “ON” or “OFF”
• If you want to change the number of
flashing, consult an authorized SUZUKI
dealer.
Guide me light setting
(Light setting) (if equipped)
You can change the lighting time of “To
car” function or “To home” function.
Antitheft
(Theft deterrent alarm system setting)
(if equipped)
You can switch the theft deterrent alarm
system from the enabled state to the dis-
abled state, and vice versa.
The state of the theft deterrent alarm sys-
tem is shown on the information display as
follows:
• Mode A: Disabled state
• Mode D: Enabled state
NOTE:
For the theft deterrent alarm system, refer
to “Theft deterrent alarm system (if
equipped)” in this section.

Suzuki SWIFT 2022 Series Specifications

General

Brand	Suzuki
Model	SWIFT 2022 Series
Category	Automobile
Language	English