2-139
BEFORE DRIVING
80SS5-01E
Automatic headlight leveling
system warning light (if equipped)
64J046
When the ignition switch is turned to “ON”
position or the engine switch is pressed to
change the ignition mode to ON, this light
comes on briefly so you can check that the
light is working.
If this light comes on, there is a problem
with the automatic headlight leveling sys-
tem. Bring the vehicle to an authorized
SUZUKI dealer to have the problem cor-
rected.
LED headlight warning light
(if equipped)
54P000234
When the engine switch is pressed to
change the ignition mode to ON, this light
comes on briefly so you can check that the
light is working.
If this light comes on, there is a problem
with the LED headlight. Park the vehicle in
a safe place and consult an authorized
SUZUKI dealer to have the problem cor-
rected.
High beam assist warning light
(orange) (if equipped)
52RS20350
When the ignition switch is turned to “ON”
position or the engine switch is pressed to
change the ignition mode to ON, this light
comes on by orange briefly so you can
check that the light is working.
For details, refer to “Dual sensor brake
support (if equipped)” in “OPERATING
YOUR VEHICLE” section.
In the following situations, this light will
come on by orange and the dual sensor
brake support will stop functioning when
the ignition switch is in “ON” position or the
ignition mode is ON.
When the dual sensor has failure, the func-
tion of the dual sensor stops until the igni-
tion switch is turned to “LOCK” position or
the engine switch is pressed to change the
ignition mode to LOCK (OFF). Find a safe
place to park and turn the ignition switch to
“LOCK” position or change the ignition
mode to LOCK (OFF) by pressing the
engine switch. Restart the engine, and
check that the dual sensor brake support
indicator light and lane departure warning
indicator light go off.
• If both of the indicators stay on after
restarting the engine, there may be a
failure of the dual sensor. Ask an autho-
rized SUZUKI dealer to have the dual
sensor inspected.
Under the following situations, the function
of the dual sensor stops temporarily. When
the situations are improved, the temporary
stop of the function will be canceled.
To Next Page
Loading...
