2-140
BEFORE DRIVING
80SS5-01E
• When the visibility of the dual sensor is
poor.
• When the temperature of the body of
dual sensor is high.
• When the systems related to the dual
sensor brake support stops temporarily.
• When the battery has a voltage abnor-
mality.
NOTE:
If the function of the dual sensor stops
temporarily, high beam assist also stops
temporarily.
High beam assist indicator light
(green) (if equipped)
52RS20350
When the high beam assist is working, this
light comes on by green.
For details, refer to “Dual sensor brake
support (if equipped)” in “OPERATING
YOUR VEHICLE” section.
PUSH indicator light (if equipped)
52RS20360
If this light comes on when depressing the
brake pedal, you can start the engine.
“ACC” indicator light (if equipped)
52RS20370
This light comes on when the ignition
mode is ACC.
Ignition “ON” indicator light
(if equipped)
52RS20380
This light comes on when the ignition
mode is ON with the engine off.
Turn signal indicators
50G055
When you turn on the left or right turn sig-
nals, the corresponding green arrow on the
instrument cluster will flash along with the
respective turn signal lights. When you
turn on the hazard warning switch, both
arrows will flash along with all of the turn
signal lights.
To Next Page
Loading...
Need help?
General
