3-110
OPERATING YOUR VEHICLE
80SS5-01E
Blind Spot Monitor (BSM)
(if equipped)
Blind Spot Monitor (BSM) detects pres-
ence of a vehicle diagonally in the rear and
tells you of the presence through the out-
side rear view mirror and an interior
buzzer. This system assists the driver in
making a lane change.
WARNING
• The BSM is a supplemental device
to tell you of a vehicle approaching
diagonally from the rear. However,
your responsibility for safety driv-
ing is the most important matter.
You must checking around it using
your direct vision or mirrors.
• Depending on the circumstances,
the system may not work. Do not
rely excessively on the system and
always drive in a safe manner. Over
reliance on this function may lead
to an accident.
The sensor detects a vehicle running on the neighboring lane or approaching from the
rear on the neighboring lane and tells the presence to you. An indicator in the outside rear
view mirror at the detected side comes on.
53SBB002
(1) A vehicle running alongside in the area where the outside rear view mirror cannot
reflect.
(2) A vehicle rapidly approaching the area where the outside rear view mirror cannot
reflect.
(1)
(2)
To Next Page
Loading...
Need help?
General
