7-22
INSPECTION AND MAINTENANCE
80SS5-01E
• Class 1: K12C engine with SHVS
• Class 2: K12C engine without SHVS
• Class 3: K12M engine
#1: Valve clearance for K12C engine model is not required for maintenance.
#2: Perform the engine coolant level check under the daily inspection in the “OPERATING YOUR VEHICLE” section.
If you use the engine coolant other than “SUZUKI LLC: Super (Blue)” for replacement, follow the schedule of “SUZUKI LLC: Stan-
dard (Green)”. (Replace every 45000 km (27000 miles) or 36 months.)
Interval: This interval should be judged by
odometer reading or months, whichever comes
first.
km (x1000) 7.5 15 22.5 30 37.5 45
miles (x1000) 4.5 9 13.5 18 22.5 27
months6 1218243036
ENGINE
*1-1. Engine accessory drive belt [Class 1] Tension check, *Adjustment, *Replacement I I I I R I
[Class 2, 3] Tension check, *Adjustment, *Replacement – I – I – R
*1-2. Valve clearance [Class 3] (#1) – – – I – –
1-3. Engine oil and engine oil filter R R R R R R
1-4. Engine coolant SUZUKI LLC: Super (Blue) (#2)
First time only: Replace at 150000 km (90000 miles) or 96 months.
Second time and after: Replace every 75000 km (45000 miles) or 48 months.
SUZUKI LLC: Standard (Green) –––––R
*1-5. Exhaust system (except catalyst) – – – I – –
IGNITION
2-1. Spark plugs [Class 1, 2] Iridium plug – – – R – –
[Class 3] Nickel plug Replace every 10000 km (6000 miles) or 8 months.
FUEL
3-1. Air cleaner filter element*
1
Inspect every 2500 km (1500 miles).
Replace every 30000 km (18000 miles) or 24 months.
*3-2. Fuel lines ––– I ––
*3-3. Fuel filter Replace every 105000 km (63000 miles).
*3-4. Fuel tank ––––– I
EMISSION CONTROL SYSTEM
*4-1. PCV valve ––––––
*4-2.
Fuel evaporative emission control system
– – – – – –
To Next Page
Loading...
Need help?
General
