7-23
INSPECTION AND MAINTENANCE
80SS5-01E
#1: Valve clearance for K12C engine model is not required for maintenance.
#2: Perform the engine coolant level check under the daily inspection in the “OPERATING YOUR VEHICLE” section.
If you use the engine coolant other than “SUZUKI LLC: Super (Blue)” for replacement, follow the schedule of “SUZUKI LLC: Stan-
dard (Green)”. (Replace every 45000 km (27000 miles) or 36 months.)
Interval: This interval should be judged by
odometer reading or months, whichever comes
first.
km (x1000) 52.5 60 67.5 75 82.5 90
miles (x1000) 31.5 36 40.5 45 49.5 54
months 42 48 54 60 66 72
ENGINE
*1-1. Engine accessory drive belt [Class 1] Tension check, *Adjustment, *Replacement I I I R I I
[Class 2, 3] Tension check, *Adjustment, *Replacement – I – I – R
*1-2. Valve clearance [Class 3] (#1) – I – – – I
1-3. Engine oil and engine oil filter R R R R R R
1-4. Engine coolant SUZUKI LLC: Super (Blue) (#2)
First time only: Replace at 150000 km (90000 miles) or 96 months.
Second time and after: Replace every 75000 km (45000 miles) or 48 months.
SUZUKI LLC: Standard (Green) –––––R
*1-5. Exhaust system (except catalyst) – I – – – I
IGNITION
2-1. Spark plugs [Class 1, 2] Iridium plug – R – – – R
[Class 3] Nickel plug Replace every 10000 km (6000 miles) or 8 months.
FUEL
3-1. Air cleaner filter element*
1
Inspect every 2500 km (1500 miles).
Replace every 30000 km (18000 miles) or 24 months.
*3-2. Fuel lines – I ––– I
*3-3. Fuel filter Replace every 105000 km (63000 miles).
*3-4. Fuel tank ––––– I
EMISSION CONTROL SYSTEM
*4-1. PCV valve ––––– I
*4-2.
Fuel evaporative emission control system
– – – – – I
To Next Page
Loading...
Need help?
General
