3-20
BEFORE DRIVING
69TB-01E
NOTE:
• The pinching prevention function does
not operate while you are holding the
window switch in the up position.
• Even if you cannot close the window by
the auto-up feature because there may
be something wrong with the pinching
prevention function, you can close the
window by holding the window switch in
the up position.
• If you drive in extreme off-road condition,
the pinching prevention function may
operate accidentally because the win-
dow reacts to vehicle jolting.
When the pinching prevention function
initialization is necessary
When you disconnect and reconnect the
lead-acid battery or replace the fuse, the
function will be deactivated. In this condi-
tion, the auto-down feature will be deacti-
vated, while the auto-up feature may
remain being activated. The pinching pre-
vention function needs to be initialized.
NOTE:
When the driver’s window cannot be auto-
matically opened or closed, perform the
pinching prevention function initialization.
How to perform the pinching prevention
function initialization
1) Start the engine.
2) Open the driver’s window fully by hold-
ing the window switch in the down posi-
tion.
3) Close the driver’s window by holding
the switch in the up position, and keep
holding the switch for 2 seconds after
the window fully closed.
4) Check the driver’s window if auto-down
and auto-up features work.
If auto-down and auto-up features do not
work after performing the above proce-
dures repeatedly, there might be some-
thing wrong with the pinching prevention
function. Have your vehicle inspected by
an authorized SUZUKI dealer or a qualified
workshop.
CAUTION
When auto-down and auto-up fea-
tures are in operation or just before
the window is fully closed, the pinch-
ing prevention function may not
detect an object caught in the win-
dow.
While the pinching prevention func-
tion is in operation, be careful not to
get your fingers caught by the win-
dow.
WARNING
As the pinching prevention function
will not operate until its initialization
is completed, an accident may occur.
Make sure to perform the pinching
prevention function initialization.
To Next Page
Loading...
Need help?
General
