4-5
INSTRUMENT CLUSTER
69TB-01E
Display (D)
Lane departure prevention indicator light
/
Lane departure prevention OFF indicator
light
Display (E)
steering assist indicator light
Display (F)
Lane keep assist indicator light
Display (G)
Traffic sign recognition (if equipped) /
Following distance indicator /
Preceding vehicle mark of adaptive cruise
control / Set speed / Lane keep assist /
Lane departure warning /
Dual Sensor Brake Support II (DSBS II)
warning
Display (H) and (J)
Warning and indicator messages /
Fuel consumption / Driving range /
Average speed / Driving time /
Total idling stop time and total idling fuel
saved (if equipped) / Clock and date /
Motion / Torque and power /
Accelerator and brake /
Energy flow (if equipped) /
Vehicle speed / Adaptive cruise control
system (if equipped) /
Cruise control (if equipped) /
Speed limiter (if equipped) /
Dual Sensor Brake Support II (DSBS II)
system / Lane departure prevention system
/ Lane keep assist /
Blind Spot Monitor (if equipped) /
Rear Cross Traffic Alert (if equipped)
Display (K)
Selector position (for CVT vehicle) /
Gear position (for CVT vehicle with manual
mode) /
Gearshift indicator (if equipped)
Display (L)
Rear passenger’s seat belt reminder /
Outside temperature
Display (M)
Odometer / Trip meter
55T040250
When the engine switch is pressed to
change the ignition mode to ON, the start-
up sound of the instrument cluster will
sound and the above images will appear
on the display for several seconds.
Some warning and indicator messages
may appear on the ignition mode is ACC or
LOCK (OFF).
NOTE:
The settings of the start-up sound can be
changed through the information display
setting mode. For details, refer to “Setting
mode of information display” (P.12-8).
Clock
The display (A) shows the time.
To set the clock, follow “Setting mode of
information display” instructions in this sec-
tion.
To Next Page
Loading...
Need help?
General
