4-47
INSTRUMENT CLUSTER
69TB-01E
High beam assist warning light
(orange)
52RM20690
When the engine switch is pressed to
change the ignition mode to ON, this light
comes on by orange briefly so you can
check that the light is working.
For details, refer to “High beam assist”
(P.5-92).
In the following situations, this light will
come on by orange and the Dual Sensor
Brake Support II (DSBS II) will stop func-
tioning when the ignition mode is ON.
When the dual sensor has failure, the func-
tion of the dual sensor stops until the
engine switch is pressed to change the
ignition mode to LOCK (OFF). Find a safe
place to park and change the ignition mode
to LOCK (OFF) by pressing the engine
switch. Restart the engine, and check that
the Dual Sensor Brake Support II (DSBS
II) indicator light and lane departure pre-
vention indicator light go off.
• If both of the indicators stay on after
restarting the engine, there may be a
failure of the dual sensor. Ask an autho-
rized SUZUKI dealer or a qualified work-
shop to have the dual sensor inspected.
Under the following situations, the function
of the dual sensor stops temporarily. When
the situations are improved, the temporary
stop of the function will be canceled.
• When the visibility of the dual sensor is
poor.
• When the temperature of the body of
dual sensor is high.
• When the systems related to the Dual
Sensor Brake Support II (DSBS II) stops
temporarily.
• When the battery has a voltage abnor-
mality.
NOTE:
If the function of the dual sensor stops
temporarily, high beam assist also stops
temporarily.
Drowsy warning light
69TJ010110
When the engine switch is pressed to
change the ignition mode to ON, this light
comes on briefly so you can check that the
light is working.
When the driver monitoring system detects
a drowsy driving or driver sleepiness, this
light comes on. For details, refer to “Driver
Monitoring System (DMS) (if equipped)”
(P.5-141).
To Next Page
Loading...
Need help?
General
