5-6
OPERATING YOUR VEHICLE
69TB-01E
69T050160
LOCK (OFF)
This mode is for parking the vehicle. When
this mode is selected by pressing the
engine switch and then any door (including
the tailgate) is opened or closed, the steer-
ing will be locked automatically.
ACC
Press the engine switch to select this igni-
tion mode to use such electric equipment
as the audio system, outside rearview mir-
rors and accessory socket with the engine
off. When this position is selected, the
information display in the instrument clus-
ter shows the following message: “ACC”
IGNITION SWITCH POSITION. Refer to
“Warning and indicator messages” (P.4-16)
for details.
ON
• With the engine off
You can use such electric equipment as
the power windows and wipers with the
engine off. When this ignition mode is
selected by pressing the engine switch,
the information display in the instrument
cluster shows the following message:
“ON” IGNITION SWITCH POSITION.
Refer to “Warning and indicator mes-
sages” (P.4-16) for details.
• With the engine on
All electric equipment is operational. The
vehicle can be driven when you have
selected this ignition mode by pressing
the engine switch.
START
• Manual transmission vehicle:
Provided you have the keyless push start
system remote controller with you, the
engine automatically starts when you
press the engine switch to select this igni-
tion mode after shifting to “N” (Neutral) and
depressing the brake and clutch pedals.
• CVT vehicle:
Provided you have the keyless push start
system remote controller with you, the
engine automatically starts when you
press the engine switch to select this igni-
tion mode after placing the gearshift lever
in “P” (Park) position and depressing the
brake pedal. (If you need to restart the
engine while the vehicle is moving, shift
into “N”.)
NOTE:
• You do not need to keep the engine
switch pressed until the engine starts.
• In the presence of strong radio wave or
noise, you may not be able to change
the ignition mode to ACC or ON or to
start the engine using the engine switch.
In this case, the information display in
the instrument cluster will show the fol-
lowing message: “KEY FOB NOT
DETECTED”.
NOTICE
Do not leave the engine switch in
ACC or ON mode when the engine is
not running. Avoid using the radio or
other electric accessories for a long
time when the engine switch is in
ACC or ON mode when the engine is
not running, otherwise the lead-acid
battery may discharge.
To Next Page
Loading...
Need help?
General
