5-84
OPERATING YOUR VEHICLE
69TB-01E
Changing Lane Departure Preven-
tion setting
The settings of the lane departure preven-
tion can be changed through the informa-
tion display setting mode. For details, refer
to “Setting mode of information display”
(P.12-8).
WARNING
If you attempt to press the lane
departure prevention OFF switch
while driving, you could lose control
of the vehicle.
Do not press the lane departure pre-
vention OFF switch while driving.
WARNING
Situations in which the lane
departure prevention should not
be used
Refer to “When it is necessary to dis-
able the system” (P.5-59) in this sec-
tion and disable the system. Failure
to do so may lead to an accident.
Situations in which the system
may not operate properly
In the following situations, the sys-
tem may not operate properly and the
vehicle may depart from its lane. Do
not overly rely on these functions.
The driver is solely responsible for
paying attention to their surround-
ings and operating the steering wheel
as necessary to ensure safety.
• When the boundary between the
asphalt and grass, soil, etc., or
structures, such as a curb, guard-
rail, etc. is not clear or straight
(Continued)
WARNING
(Continued)
• When the vehicle is struck by a
crosswind or the turbulence of
other nearby vehicles
• Situations in which the lane may
not be detected: Refer to “Situa-
tions in which the lane may not be
detected” (P.5-65) in this section.
• Situations in which the sensors
may not operate properly: Refer to
“Situations in which the front cam-
era (DSBS II) and front radar (DSBS
II) may not operate properly” (P.5-
64) in this section.
• Situations in which some or all of
the functions of the system cannot
operate: Refer to “Situations in
which some or all of the functions
of the system cannot operate” (P.5-
66) in this section.
To Next Page
Loading...
Need help?
General
