5-98
OPERATING YOUR VEHICLE
69TB-01E
Changing the traffic sign recogni-
tion settings
The settings of the traffic sign recognition
can be changed through the information
display setting mode. For details, refer to
“Setting mode of information display”
(P.12-8).
Adaptive cruise control
(if equipped)
This adaptive cruise control uses front
radar (DSBS II) and front camera (DSBS
II) to detect the presence of vehicles
ahead, determines the current vehicle-to-
vehicle distance, and operates to maintain
a suitable distance from the vehicle ahead.
The desired vehicle-to-vehicle distance
can be set by operating the following dis-
tance setting switch.
Use the adaptive cruise control only on
highways and expressways.
WARNING
For safe use
• Driving safely is solely the respon-
sibility of the driver. Do not overly
rely on this system, and pay careful
attention to the surrounding condi-
tions in order to ensure safe driv-
ing.
(Continued)
WARNING
(Continued)
• The adaptive cruise control pro-
vides driving assistance to reduce
the driver's burden. However, there
are limitations to the assistance
provided.
Read the following items carefully.
Do not overly rely on this system
and always drive carefully.
– Conditions under which the sys-
tem may not operate correctly:
Refer to “Conditions under which
the system may not operate cor-
rectly” (P.5-106) in this section.
• Set the speed appropriately
according to the speed limit, traffic
flow, road conditions, weather con-
ditions, etc. The driver is responsi-
ble for confirming the set speed.
• Even if the system is operating cor-
rectly, the condition of a preceding
vehicle as recognized by the driver
and detected by the system may
differ. Therefore, it is necessary for
the driver to pay attention, assess
risks, and ensure safety. Over-reli-
ance on this system to drive the
vehicle safely may lead to an acci-
dent resulting in death or serious
injury.
(Continued)
To Next Page
Loading...
Need help?
General
