6-12
ADVICE FOR YOUR DRIVING
69TB-01E
Risk of installing electrical equip-
ment other than SUZUKI genuine
products
When installing, removing and
repairing parts
WARNING
(Continued)
• Do not use wheels or wheel nuts
other than specified SUZUKI genu-
ine products. Doing so could lead
to accidents, such as nuts loosen-
ing and the wheel coming off while
driving. Also, fuel consumption
and driving stability could worsen,
or it could result in other malfunc-
tions.
NOTICE
• When installing or removing electri-
cal equipment such as radio equip-
ment, navigation, audio equipment
or electronic toll control equip-
ment, consult with an authorized
SUZUKI dealer or a qualified work-
shop. Also, do not operate electri-
cal equipment directly from the
battery terminals or connect
ground wires directly. Otherwise,
there is a danger of hindering the
functioning of electronic compo-
nents, causing fire, malfunction,
battery runout, etc.
(Continued)
(Continued)
• Only a troubleshooting device
designed for inspection and main-
tenance for this model can be con-
nected to the vehicle’s onboard
diagnostics system. Connecting a
device other than that specified
could hinder the functioning of
electronic components and cause
battery runout, etc.
NOTICE
Installing electrical equipment other
than SUZUKI genuine products may
cause other electrical equipment to
malfunction, lead to serious failure or
leakage of personal information.
SUZUKI will not be responsible for
any failure or damage caused by the
installation of electrical equipment
other than SUZUKI genuine products.
NOTICE
WARNING
The SRS airbag system and the seat
belt pretensioner system could acti-
vate unexpectedly or could be ren-
dered ineffective if the parts that
affect their functions are adjusted or
arranged. In the following cases,
these systems will be adversely
affected. Consult with an authorized
SUZUKI dealer or a qualified work-
shop beforehand.
• When removing the steering wheel
and conducting repairs around the
steering wheel, etc.
• When conducting repairs around
the center console, around the
instrument cluster, under the front
seats or to electrical wiring
• When installing audio equipment,
etc.
• When conducting sheet metal
painting or repairs around the
dashboard
• When replacing the front seats or
conducting repairs around the
seats
• Repairs around the front pillar, the
back pillar or the roof side
• When conducting repairs around
the center pillar
To Next Page
Loading...
Need help?
General
