EasyManuals Logo

Suzuki SWIFT 2024 User Manual

Suzuki SWIFT 2024
570 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #472 background imageLoading...
Page #472 background image
9-44
INSPECTION AND MAINTENANCE
69TB-01E
*1: Since the lights are non-disassemble
type, you cannot replace a bulb.
Replace the target assembly if any
bulb is defective.
NOTE:
The inner surface of lens such as the
headlights or the rear combination lights
may be clouded or dew condensation may
occur by driving on a rainy day or washing
the vehicle. This is a temporary phenome-
non caused by temperature difference
between the inside and the outside of the
lights. (This is the same phenomenon as
the windows are clouded on a rainy day.)
Also, it sometimes seems that water gets
into the lights because of waterdrop on the
edge of the lens. This is a temporary phe-
nomenon caused by water adherence to
the outside of the lights.
The above-mentioned phenomena are not
vehicle malfunction.
However, if water is piled up in the lights or
large waterdrop adheres to the inner sur-
face of lens, have your vehicle inspected
by an authorized SUZUKI dealer or a qual-
ified workshop.
Non-disassembled type lights
Since the lights shown below are non-dis-
assemble type, you cannot replace a bulb.
Replace the target assembly if any bulb is
defective.
If you need to replace the assembly, ask
an authorized SUZUKI dealer. or a quali-
fied workshop
LED headlight
Position light and Daytime Running Light
(D.R.L)
Side turn signal light/hazard warning
light
High mount stop light
Tail/brake light
License plate light
LED headlights
Since special procedures are required, it is
recommended that you take your vehicle
to an authorized SUZUKI dealer or a quali-
fied workshop for light replacement.
CAUTION
Light bulbs can be hot enough to
burn your finger right after turning
off lights. Replace the bulbs after
they become cool enough.
To avoid injury by sharp-edged
parts of the body, wear gloves and
a long-sleeved shirt when replacing
light bulbs.
NOTICE
The oils from your skin may cause
a halogen bulb to overheat and
burst when the lights are on. Grasp
a new bulb with a clean cloth.
Frequent bulb replacement indi-
cates the need for an inspection of
the electrical system. This should
be carried out by an authorized
SUZUKI dealer or a qualified work-
shop.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Suzuki SWIFT 2024 and is the answer not in the manual?

Suzuki SWIFT 2024 Specifications

General IconGeneral
BrandSuzuki
ModelSWIFT 2024
CategoryAutomobile
LanguageEnglish

Related product manuals