2-7
FOR SAFE DRIVING
69TB-01E
Head restraints
80J001
Head restraints are designed to help
reduce the risk of neck injuries in the case
of an accident. Adjust the head restraint to
the position which places the center of the
head restraint closest to the top of your
ears. If this is not possible for very tall pas-
sengers, adjust the head restraint as high
as possible.
NOTE:
It may be necessary to recline the seat-
back to provide enough overhead clear-
ance to remove the head restraint.
69TJ020040
To raise the front head restraint, pull
upward the head restraint until it clicks. To
lower the head restraint, push down the
head restraint while holding in the lock but-
ton (1). If a head restraint must be
removed (for cleaning, replacement, etc.),
push in the lock button (1) and pull the
head restraint all the way out.
WARNING
• If you drive the vehicle with the
head restraint removed, a passen-
ger's backward tilting cannot be
prevented in a collision from the
backward and the impact to a pas-
senger's head cannot be reduced
in a sudden braking or a collision.
This may cause severe injury.
Never drive the vehicle with the
head restraints removed.
• If the head restraint is installed
back to front or it is not installed
securely, the head restraint may
not provide the best performance
in case of emergency, resulting in
severe injury.
If the head restraint is installed
back to front, you cannot adjust the
height and install it securely.
Make sure to install the head
restraint securely in the right direc-
tion.
• Being distracted by head restraint
adjustment could lead to an acci-
dent.
Do not attempt to adjust the head
restraint while driving.
(1)
To Next Page
Loading...
Need help?
General
