2-10
FOR SAFE DRIVING
69TB-01E
To adjust the mirror, set the selector tab (1)
to the day position, and then move the mir-
ror up, down or sideways by hand to obtain
the best view.
When driving at night, you can move the
selector tab to the night position to reduce
glare from the headlights of vehicles
behind you.
Outside rearview mirrors
69T020060
The switch to control the electric mirrors is
located on the driver’s door panel. You can
adjust the mirrors when the ignition mode
is ACC or ON. To adjust the mirrors:
1) Move the selector switch to the left or
right to select the mirror you wish to
adjust.
2) Press the outer part of the switch that
corresponds to the direction in which
you wish to move the mirror.
3) Return the selector switch to the center
position to help prevent unintended
adjustment.
Outside rearview mirror folding
switch (if equipped)
69T020070
WARNING
• If you adjust the inside rearview
mirror while driving, you could lose
control of the vehicle, resulting in
an accident.
Adjust the inside rearview mirror
before driving.
• Always adjust the mirror with the
selector set to the day driving posi-
tion.
• Only use the night position if it is
necessary to reduce glare from the
headlights of vehicles behind you.
Be aware that in this position you
may not be able to see some
objects that could be seen in the
day position.
WARNING
If you adjust the outside rearview mir-
rors while driving, you could lose
control of the vehicle, resulting in an
accident.
Adjust the outside rearview mirrors
before driving.
To Next Page
Loading...
Need help?
General
