2-13
FOR SAFE DRIVING
69TB-01E
Folding rear seats
The rear seats of your vehicle can be
folded forward to provide additional cargo
space.
To fold the rear seats forward:
1) Lower the head restraint fully.
69T020120
2) Hook the webbing of the outboard lap-
shoulder belts in the belt hangers.
69T010140
3) Pull the release lever on the top of each
split seat, and fold the seatbacks for-
ward.
WARNING
When you move a seatback, make
sure the belt webbing is hooked in
the seat belt hangers so the seat
belts are not caught by the seatback,
seat hinge, or seat latch. This helps
prevent damage to the belt system.
NOTICE
Make sure the belt webbing is not
twisted.
WARNING
If you need to carry cargo in the pas-
senger compartment with the rear
seatback folded forward, secure the
cargo or it may be thrown about,
causing injury. Never pile cargo
higher than the seatbacks.
NOTICE
After folding the rear seatback for-
ward, do not allow any foreign mate-
rial to enter the lock opening. This
may cause damage to the inside of
the lock and prevent the seatback
from being locked securely.
To Next Page
Loading...
Need help?
General
