2-21
FOR SAFE DRIVING
69TB-01E
80J2008
NOTE:
The word “CENTER” is marked on the
buckle for the rear center belt. The buckles
are designed so a latch plate cannot be
inserted into the wrong buckle.
59RN02340
To unfasten the seat belt, push the red
“PRESS” button on the buckle and retract
the belt slowly while holding the belt or/and
the latch plate.
Adjustment of seat belt length
The seat belt does not require length
adjustment. The seat belt extends and
retracts according to the movement of the
body. If the seat belt gets a strong impact,
the belt locks its tension automatically, in
order to secure the body.
Shoulder anchor height adjuster
(only for front seat)
59RN02420
Adjust the shoulder anchor height so that
the shoulder belt rides on the center of the
outboard shoulder. To move upward, slide
the anchor (1) up. To move downward,
slide the anchor down while pulling the
lock knob (2) out. After adjustment, make
sure that the anchor is securely locked.
WARNING
Be sure that the shoulder belt is posi-
tioned on the center of the outside
shoulder. The belt should be away
from your face and neck, but not fall-
ing off your shoulder. Misadjustment
of the belt could reduce the effective-
ness of the safety belt in a collision.
To Next Page
Loading...
Need help?
General
