2-76
ABS MODE (V-STROM 1050XT)
It is possible to change the ABS MODE
under the following condition A or B.
A. When the motorcycle is stopped
B. When the motorcycle is running with
the throttle closed completely and
without operating the brake
The ABS mode selector sets two types
of ABS control characteristics.
• Mode 1:
Control with little ABS intervention
• Mode 2:
Standard ABS control
1. Press the MODE switch 1 to go into
the mode selection state.
2. Close the throttle grip completely.
Press the select switch 2 (Up or
Down) for about 2 seconds to select
a mode.
- By pressing the select switch
2
(Up) for about 2 seconds, the indica-
tion changes in the order of 2
1.
- By pressing the select switch 2
(Down) for about 2 seconds, the
indication changes in the order of
1 2.
To Next Page
Loading...
