2-77
3. The ABS mode indicator indicates
the selected mode. When the MODE
switch 1 is pressed, the mode
selection state is canceled.
NOTE: If the mode cannot be changed,
the indicator blinks when the select
switch 2 is pressed.
CRUISE CONTROL (V-STROM
1050XT)
Cruise control is a function that allows
you to ride at a set speed on a road
where little acceleration or deceleration
is required, such as a highway, without
operating the throttle grip.
It offers a resume function that returns
to the previously set speed after the set
speed was canceled.
NOTE:
• The cruise control indicator blinks if
it is not possible to set the target
motorcycle speed from the standby
state because the conditions allow-
ing setting are not met.
• Cruise control may not be able to
maintain the target motorcycle
speed under some road conditions
such as an uphill or downhill slope.
• Cruise control is turned off when the
main key is turned off.
To Next Page
Loading...
