2-81
NOTE: During constant speed riding at
the set speed, turn the throttle grip to
accelerate above the set speed.
Release the throttle grip to return to the
target motorcycle speed. When riding at
a speed above the target motorcycle
speed, press the select switch (SET/-)
“ ” to change the target motorcycle
speed to the current speed.
Canceling constant speed riding
Under the following conditions, constant
speed riding is canceled and cruise
control returns to the standby state.
• Throttle grip is turned in the close
direction from the fully closed posi-
tion 1
2
:Canceled position
• Clutch lever is squeezed
• Brake lever or brake pedal is oper-
ated
• Motorcycle speed is less than about
31 mph (50 km/h)
• Gear position is 3rd or lower
• Set speed cannot be reached in a
long time, such as on a slope
To Next Page
Loading...
