2-82
• Tires spin
• Cruise control is turned off, see
“Cruise control released (turned off)”
on page 2-83.
NOTE:
• Constant speed riding is canceled
when a system error occurs.
• Constant speed riding is canceled
and cruise control is turned off when
the MODE switch is pressed.
Resume function
If setting data remains in the system
when constant speed riding is can-
celed, press the select switch (RES/+)
“ ” to return to the target motorcycle
speed at the time constant speed riding
was canceled.
On resume, the cruise control indicator
light comes on after blinking for 3 sec-
onds.
The resume function cannot be used in
the following circumstances because
the setting data is deleted.
• Motorcycle speed is less than about
31 mph (50 km/h)
• Ignition switch was turned off
• Cruise control is turned off
3
To Next Page
Loading...
