3-67
2. Retighten the lock nut 1 to secure
the push rod
2 in the proper posi-
tion.
REAR BRAKE LIGHT SWITCH
Check that the brake light lights when
the rear brake pedal is depressed
approximately 0.4 in (10 mm). Adjust
the rear brake light switch if the light
lights too early or late.
0.4 in (10 mm)
NOTICE
An incorrectly adjusted brake pedal
may force brake pads to continu-
ously rub against the disk, causing
damage to the pads and disk.
Follow the steps in this section to
adjust the brake pedal properly.
To Next Page
Loading...
