9-3
TIRES
Inflate the tires to the normal
specifications.
EXTERNAL
• Spray all vinyl and rubber
parts with rubber preservative.
• Spray the unpainted surfaces
with rust preventative.
• Coat the painted surfaces with
car wax.
MAINTENANCE DURING
STORAGE
Once a month, recharge the bat-
tery. The standard charging rate is
1.2A × 5 to 10 hours.
PROCEDURE FOR RETURNING
TO SERVICE
1. Clean the entire motorcycle.
2. Remove the oily rags from the
air cleaner intake and muffler
outlet.
3. Drain all the engine oil. Install
a new oil filter and fill the
engine with fresh oil as out-
lined in this manual.
4. Reinstall the battery.
5. Remove the spark plugs. Turn
the engine a few times. Rein-
stall the spark plugs.
6. Make sure that the motorcycle
is properly lubricated.
7. Perform the INSPECTION
BEFORE RIDING as listed in
this manual.
8. Start the motorcycle as out-
lined in this manual.
To Next Page
Loading...
