7-37
REAR WHEEL REMOVAL
1. Place the motorcycle on the
side stand. Remove the seat
by referring to the BATTERY
section.
2. Disconnect the coupler.
Remove the bolts 1, 2.
Remove the right and left rear
frame with a rear fender 3.
3. Remove the brake adjuster nut
4 and torque link nut 5.
Remove the axle nut 6.
WARNING
Removing the rear wheel with-
out use of an accessory stand
can result in your motorcycle
falling over and being dam-
aged.
Do not attempt road side
removal of the rear wheel. Only
remove the rear wheel at a
properly equipped servicing
facility using an accessory ser-
vice stand.
WARNING
A hot muffler can burn you. The
muffler will be hot enough to
burn you for some time after
stopping the engine.
Wait until the muffler cools to
avoid burns.
To Next Page
Loading...
