3-21
3. Pull the hook to open the box
lid.
4. Unhook the hooks and remove
the cover.
5. Loosen the bolts and remove
the tool box.
6. Twist the spring tension ring to
the desired position with an
adjuster. Position 1 provides
the softest spring tension and
position 7 provides the stiffest.
This motorcycles is delivered
from the factory with its
adjuster set on position 4.
NOTE: Use a hook type spring
adjuster or Suzuki spring adjuster,
Part number 09822-00003 to
adjust the rear suspension spring.
The Suzuki spring adjuster is
available from your Suzuki dealer.
NOTE: If it is hard to adjust the
spring pre-road, remove the bolts
and move the battery box.
To Next Page
Loading...
