7-16
ENGINE OIL AND FILTER
CHANGE
Change the engine oil and oil filter
at the scheduled times. The
engine should always be warm
when the engine oil is changed so
the engine oil will drain easily. The
procedure is as follows:
1. Place the motorcycle on level
ground on the side stand.
2. Remove the oil filler cap.
3. Remove the drain plug from
the bottom of the engine and
drain the engine oil into a drain
pan.
WARNING
Engine oil and exhaust pipes
can be hot enough to burn you.
Wait until the engine oil drain
plug and exhaust pipes are
cool enough to touch with bare
hands before draining oil.
To Next Page
Loading...
