Suzuki VL800 - Page 97

7-41
Turn Signal Light
1. Remove the screw 1.
2. Turn the lens counterclockwise
and remove it.
3. Push in on the bulb 2, turn it
to the left, and pull it out.
4. To fit the replacement bulb,
push it in and turn it to the right
while pushing.
License Plate Light
To replace the license plate light
bulb, follow the procedure below:
1. Turn the license plate lens
counterclockwise and remove
it.
2. Pull off the bulb from the
socket.
CAUTION
Overtightening the screws
when reinstalling the lens may
cause the lens to crack.
Tighten the screws only until
they are snug.