Need help?Do you have a question about the Suzuki XF650 and is the answer not in the manual?
General| Displacement | 644 cc |
|---|---|
| Starting | Electric |
| Lubrication | Wet sump |
| Final Drive | Chain |
| Bore x Stroke | 100.0 mm x 82.0 mm |
| Transmission | 5-speed |
| Front suspension | Telescopic, coil spring, oil damped |
| Rear suspension | Link type, coil spring, oil damped |
| Front brakes | Single disc |
| Rear brakes | Single disc |
| Front tire | 90/90-21 |
| Overall Width | 865 mm |
Explains the meaning of WARNING, CAUTION, and NOTE symbols used in the manual.
Outlines essential safety rules and procedures for servicing the motorcycle.
Specifies recommended fuel octane and engine oil viscosity grades.
Provides guidelines for the initial running-in period of the motorcycle.
Lists the technical specifications and dimensions of the motorcycle.
Provides a schedule of maintenance tasks based on mileage and time intervals.
Identifies key lubrication points on the motorcycle with accompanying diagrams.
Explains how to inspect and adjust valve clearance for optimal engine performance.
Details inspection, gap measurement, and replacement of spark plugs.
Covers cleaning and replacement procedures for the air cleaner element.
Covers draining, refilling, and filter replacement for engine oil.
Details inspection, cleaning, lubrication, and adjustment of the drive chain.
Explains how to check the engine's compression pressure.
Provides step-by-step instructions for removing and reinstalling the engine.
Guides through the process of dismantling and putting the engine back together.
Details the assembly and disassembly of the cylinder head cover and rocker arms.
Covers removal, inspection, and installation of camshaft, cylinder head, and valves.
Explains procedures for cylinder and piston removal, inspection, and installation.
Covers clutch removal, inspection, service, and installation procedures.
Describes the oil filter, oil pump, and oil sump filter components and their servicing.
Explains the operation of the fuel system, including the fuel tank and valve.
Details the construction and components of the carburetor.
Provides instructions for cleaning carburetor jets and passages.
Details the steps for removing the motorcycle's fairings.
Illustrates the components and torque values for the front wheel assembly.
Shows the components and torque values for the front fork assembly.
Step-by-step guide for replacing brake pads.
Illustrates the steering system components and torque values.
Shows the components and torque values for the rear wheel assembly.
Provides general cautions for working with electrical components.
Identifies the location of key electrical parts on the motorcycle.
Explains the operation of the motorcycle's charging system.
Provides a flowchart for diagnosing electrical system issues.
Details the steps for removing and disassembling the starter motor.
Lists common engine complaints, causes, and remedies.
Lists common chassis complaints, causes, and remedies.
Lists common electrical complaints, causes, and remedies.
Provides a comprehensive chart of torque specifications for various components.
Lists detailed service data and specifications for various parts.
Details the specifications for the '98-'99 models.
Provides service data for valve and guide components for these models.
Lists service data for camshaft and cylinder head parts.
Provides service data for cylinder, piston, and piston ring components.
Details the specifications for the 2000 model.
Lists contents for engine-related procedures for the 2000 model.
Lists contents for chassis-related procedures for the 2000 model.
Details the specifications for the '01 model.
Provides service data for valve and guide components for the '01 model.
Lists service data for camshaft and cylinder head parts for the '01 model.
Provides service data for cylinder, piston, and piston ring components for the '01 model.
To Next Page
