33
2. Countdown starts directly with the nal setting after the timer is set.
After 5 seconds, timer setting mode period ends
automatically and timer display indicates the set time
value.
To change the time for independent timer;
It may be set to the desired time again by pressing the and keys
next to the timer display once.
Buzzer sounds when the set time has expired and timer display ashes
. Just press any key on the touch panel to end the buzzer.
WARNING: Buzzer ends automatically after 2 minutes when no key is
touched.
WARNING: Turning off the stove (pressing on/off button) stops the
independent timer. Timer does not resume when the stove is turned on.
Press The Button Cooking Area Timer Function
To set the timer;
1. Determine the relevant hob for setting time while the stove is on, and
set the temperature to the desired level from 1 to 9 using and keys.
2. The desired time is set using and keys next to the timer when the
temperature level is ashing (for 5 seconds).
The point next to the temperature level on the hob, for which
the remaining time is being displayed, ashes.
WARNING: If more than one timer is active, timer display indicates the
lowest remaining time value after the 5-second setting period. The point
next to the hob, for which the remaining time is being displayed, ashes.
A buzzer sounds and the programmed cooking area nishes the cooking
function after the set time has expired. symbol is displayed on the
touch screen and the symbol ashes if the cooking area is still hot.
1
2
To Next Page
Loading...