The most suitable temperature for the room during the summer varies from 24
℃
to 27
℃
(75
℉
to 81
℉
).
You are recommended, however, not to set a temperature much below the outdoor temperature. The fan
speed difference is more noticeable when the appliance is under Fan mode but may not be noticeable
under Cool mode.
HEAT mode *
“ * “ means only the heat pump model have this function.
To set this mode correctly:
● Press the button a number of times until the Heat symbol appears.
● Select the target temperature13
℃
-27
℃
(55
℉
-81
℉
) by pressing the
▲
or
▼
button until the
corresponding value is displayed.
● Select the required fan speed by pressing the button.
Four speeds are available: High / Medium / Low / Auto.
● Water is removed from the air and collected in the tank.
● When the tank is full, the appliance shuts down and “ ” (full tank) appears on the display. The
tank cap must be extracted and emptied. Run off all water left into a basin. When all the water has
been drained, put the cap back in place.
● When the tank has been emptied, the appliance starts up again.
To Next Page
Loading...
