EasyManua.ls Logo

Svan SVAN212PF - Troubleshooting

Svan SVAN212PF
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
The appliance
does not come on
There is no current
It is not plugged into the mains
The internal safety device has
tripped
● Wait
● Plug into the mains
● Wait 30 minutes, if the problem
persists, contact your service
center
The appliance
works for a short
time only
● Here are bends in the air exhaust
hose
● Something is preventing the
air from being discharged
● Position the air exhaust hose
correctly, keeping it as short
and free of curves as possible
to avoid bottlenecks
● Check and remove any
obstacle
obstructing air discharge
The appliance
works, but does not
cool the room
● Windows, doors and/or curtains
open
● Close doors, windows and
curtains, bearing in mind the
"tips for correct use" given
above
● There are heat sources in the
room (oven, hairdryer, etc)
● Eliminate the heat sources
● The air exhaust hose is detached
from the appliance
● Fit the air exhaust hose in the
housing at the back of the
appliance
● The technical specification of
the appliance is not adequate for
the room in which it is located
During operation,
there is an
unpleasant smell in
Air filter clogged
● Clean the filter as described
above

Related product manuals