INSERTING OR REPLACING THE BATTERIES
● Remove the cover on the rear of the remote control;
● Insert two "AAA" 1.5V batteries in the correct position (see instructions inside the battery
compartment);
NOTE:
√ If the remote control unit is replaced or disposed of, the batteries must be removed and discarded in
accordance with current legislation as they are harmful to the environment.
√ Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
√ Do not dispose of batteries in fire. Batteries may explode or leak.
√ If the remote control is not be used for a certain length of time, remove the batteries.
COOL mode
Ideal for hot muggy weather when you need to cooling and dehumidify the room
To set this mode correctly:
● Press the button a number of times until the “Cool” symbol appears.
● Select the target temperature18
℃
-32
℃
(64
℉
-90
℉
) by pressing
The
∧
or
∨
button until the corresponding value is displayed.
To Next Page
Loading...
