● Press again the Timer button or the button, the timer will be canceled, and the “Timer” symbol will
disappear from screen.
Programming shut down
● When the appliance is running, press the button, the Timer indicator and the hours flash.
● Press several times until the corresponding time is displayed. Wait about 5 seconds, the timer will be
active, then “Timer” symbol is displayed on screen.
● A few second after set, the setting is memorized, the timer indicator is light and the display shows the
current mode. At the end of the set time the unit automatically turns to standby mode.
● Press again the Timer button or the button, the timer will be canceled, and the “Timer” symbol will
disappear from screen.
To Next Page
Loading...
