FAN mode
When using the appliance in this mode, the air hose does not need to be attached.
To set this mode correctly:
—Press the “ ” button a number of times until the “Fan” symbol appears.
—Select the required fan speed by pressing the “ ”button.
Two speeds are available: High/Low
DRY mode
Ideal to reduce room humidity (spring and autumn, damp rooms rainy periods, etc.).
Before using the dry mode, the appliance should be prepared in the same way as for cool
mode, with the air exhaust hose attached to enable the moisture to be discharged outside.
To set this mode correctly:
－Press the “ ” button a number of times until the
“Dry”symbol light appears, the screen will appear ” ”；
－In this mode, fan speed is selected automatically by the appliance.
HEAT mode *
“* “means only the heat pump model have this function.
To set this mode correctly:
● Press the button a number of times until the Heat symbol appears.
● Select the target temperature13℃-27℃(55℉-81℉) by pressing the △ or ▽ button until
the corresponding value is displayed.
To Next Page
Loading...
