INSERTING OR REPLACING THE BATTERIES
● Remove the cover on the rear of the remote control;
● Insert two "AAA" 1.5V batteries in the correct
position (see instructions inside the battery compartment;
NOTE:
√ If the remote control unit is replaced or disposed of, the
batteries must be removed and discarded in accordance with
current legislation as they are harmful to the environment.
√ Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
√ Do not dispose of batteries in fire. Batteries may explode or leak.
√ If the remote control is not be used for a certain length of time, remove the batteries
COOL mode
Ideal for hot muggy weather when you need to cooling and
dehumidify the room.
To set this mode correctly:
—
Press the
“ ”
button a number of times until the
“
Cool
”
symbol light appears.
—
Select the target temperature18
℃
-32
℃
(64
℉
-90
℉
) by pressing the
“∧”
or
“∨”
button
until the corresponding value is displayed.
—
Select the required fan speed by pressing the
“ ”
button. Different fan speed have
different function.
The most suitable temperature for the room during the summer varies from 24
℃
to
27
℃
(75
℉
to 81
℉
). You are recommended, however, not to set a temperature much
below the outdoor temperature. The fan speed difference is more noticeable when the
appliance is under FAN mode but may not be noticeable under COOL mode.
To Next Page
Loading...
