TURNING THE APPLIANCE ON
Plug into the mains socket, then the appliance is standby.
Press the button to make the appliance turn on. The last function active when it was
turned off will appear.
√ Never turn the air conditioner off by unplugging from the mains. Always press the
button , then wait for a few minutes before unplugging. This allows the appliance to
perform a cycle of checks to verify operation.
COOL mode
Ideal for hot muggy weather when you need to cooling and
dehumidify the room.
To set this mode correctly:
—Press the“ ”button a number of times until the “Cool” symbol light appears.
—Select the target temperature18℃-32℃(64℉-90℉) by pressing the “△”or “▽” button until the
corresponding value is displayed.
—Select the required fan speed by pressing the “ ” button. Different fan speed have
different function.
High speed display “F2”, low speed display “F1”.
The most suitable temperature for the room during the summer varies from 24℃ to 27℃. You
are recommended, however, not to set a temperature much below the outdoor temperature.
This will cause unnecessary power consumption.
To Next Page
Loading...
