"Mode" or "fan speed" button.
In FAN or DRY mode, SLEEP function cannot be set.
SETTING THE TIMER
-This timer can be used to delay the appliance start up or shutdown, this avoids wasting
electricity by optimizing operating periods.
Programming start up
－
Turn on the appliance, choose the mode you desire, for example cooling, 24
℃
and high
fan speed. Turn off the appliance.
－
Press the button, the screen will display 1-24 hours.
－
Press several times until the corresponding time is displayed. Wait about 5 seconds, the
timer will be active, then “Timer” symbol is displayed on screen.
－
Press again the “ ”button, the timer will be canceled, and the ”Timer” symbol will
disappear from screen.
Programming shut down
－
Under the running of appliance, please press the button, the screen will display
1-24 hours.
－
Press several times until the corresponding time is displayed. Wait about 5 seconds, the
timer will be active, then “Timer” symbol is displayed on screen.
－
Press again the “ ” button, the timer will be canceled, and the ”Timer” symbol will
disappear from screen.
Switch the unit of temperature
When the appliance is running, press the button, then you can change the unit of
temperature.
For example:
Before change, in cool mode, the screen display like fig1.
To Next Page
Loading...
