EasyManua.ls Logo

Svantek SVAN 958 - Page 3

Default Icon
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SVAN 958 USER MANUAL
i
CONTENTS
1 INTRODUCTION 1-1
1.1 SVAN 958 as Sound Level Meter & Analyser 1-1
1.2 SVAN 958 as Vibration Meter & Analyser 1-2
1.3 General features of SVAN 958 1-2
1.4 Accessories included 1-3
1.5 Accessories available 1-3
2 MANUAL CONTROL OF THE INSTRUMENT 2-1
2.1 Control push-buttons on the front panel 2-1
2.2 Input and output sockets of the instrument 2-6
3 SETTING THE INSTRUMENT 3-1
3.1 Basis of the instrument’s control 3-1
3.2 Powering of the instrument 3-25
3.3 Initial setup of the instrument 3-27
3.4 Activation of optional functions 3-32
3.5 Memory organisation 3-33
4 FUNCTIONS OF THE INSTRUMENT - FUNCTION 4-1
4.1 Measurement functions of the instrument - MEASUREMENT FUNCTION 4-1
4.2 Instrument’s calibration - CALIBRATION 4-2
4.2.1 Calibration by the sensitivity introduction 4-2
4.2.2 Calibration by the measurement 4-5
4.2.3 View on the last calibration result - CALIBRATION HISTORY 4-8
5 MEASUREMENT PARAMETERS SETTING - INPUT 5-1
5.1 Selection of measurement parameters - MEASUREMENT SETUP 5-2
5.1.1 Setting time delay before the start of measurements - START DELAY 5-2
5.1.2 Setting integration period - INT. PERIOD 5-3
5.1.3 Setting the number of repetition of measurement cycles - CYCLES NUMBER 5-4
5.1.4 Setting time period between two writings to the logger’s file - LOGGER STEP 5-4
5.2 Setting parameters in channels - CHANNELS SETUP 5-6
5.2.1 Selection of measurement mode for sound or vibration - MODE 5-6
5.2.2 Measurement range setting - RANGE 5-7
5.2.3 Weighting filter selection in a profile - FILTER 5-7
5.2.4 RMS detector selection - DETECTOR 5-9
5.2.5 Setting the parameters of microphone (SM) - MICROPHONE CORRECTION 5-9
5.3 Results selection for saving in a logger’s file - LOGGER SETUP 5-10
5.3.1 Selecting results to be saved in instrument’s logger memory - LOGGER MODE 5-10
5.3.2 Selecting time-history results to be saved in the memory - LOGGER MODE: ON 5-10
5.3.3 Selecting parameters of low sampling rate time-domain signal recording (svn
format) in memory of the instrument - LOGGER MODE: TIME 5-11

Related product manuals