Need help?Do you have a question about the Svantek SV 971A and is the answer not in the manual?
General| Brand | Svantek |
|---|---|
| Model | SV 971A |
| Category | Measuring Instruments |
| Language | English |
Describes the SV 971A's capabilities as a Sound Level Meter and Analyser, conforming to standards.
Lists the key features and functionalities of the SV 971A instrument.
Explains how to select and activate different measurement functions like SLM, Octave Analysis, and Dosimeter.
Details the procedure for calibrating the instrument, including manual and automatic methods.
Configures general measurement parameters like start delay, synchronization, and integration period.
Configures measurement triggers based on signal level, slope, or gradient for automated data capture.
Configures the instrument's data logging functionality, including parameters and output.
Enables or disables various measurement result presentation views (modes).
Adjusts the spectrum graph scale, switches grid on/off, and configures automatic Y-scale.
Selects which Sound Level Meter or Dose Meter results will be presented on the display.
Provides access to files and directories on the SD card for operations like renaming and deleting.
Manages setup files, including saving, loading, deleting, and displaying information.
Allows selection of the user interface mode: Start/Stop, Simple, or Advanced.
Programs the operation mode of the <Shift> key, key lock, and fast unlock functions.
Sets the period after which the instrument automatically turns off due to inactivity.
Selects and programs serial ports for RS232 or Bluetooth communication.
Programs the instrument's internal real-time clock for accurate timekeeping.
Restores the instrument to its default factory settings.
Activates or deactivates warning messages displayed during normal operation.
Enables printing measurement results to an attached printer or PC.
Specifies the content of the report, including profiles, results, statistics, and spectra.
Selects the 1/1 Octave or 1/3 Octave analysis function for spectral measurements.
Configures general measurement settings for 1/1 and 1/3 octave analysis.
Sets parameters for customizing the presentation of 1/1 and 1/3 octave results.
Guides the user on how to select and activate the Dosimeter function for noise exposure measurements.
Configures general settings for the Dosimeter function, including automatic pauses.
Configures alarm thresholds for the Dosimeter function to alert the user of exceeded levels.
Guides the user on how to select and activate the RT60 function for reverberation time analysis.
Sets parameters for RT60 calculations, including method, file name, and start delay.
Guides the user on how to select and activate the STIPA function for speech intelligibility analysis.
Details the process of performing STIPA measurements and calculations.
Guides through configuring STIPA settings for project, area, source, and averaging.
Describes how to perform STIPA measurements using the BA Assistant mobile application.
Explains how to download and process STIPA measurement files using SvanPC++ software.
Provides instructions for downloading and installing the Assistant mobile application.
Explains how to establish a Bluetooth connection between the instrument and the mobile device.
Describes how to control the instrument and view results via the Assistant application.
Details the SvanPC++ software for data download, post-processing, reporting, and configuration.
Describes the Supervisor software for managing instruments, sessions, and reports.
Details the BA Assistant mobile application for building acoustics and speech intelligibility measurements.
Provides instructions on how to replace the internal AAA batteries.
Details the procedure for accessing and managing the micro SD card.
Explains how to perform system and hardware resets to restore default settings or recover from issues.
Guides the user through the process of updating the instrument's firmware.
Provides solutions for common instrument issues, including power and response problems.
Explains the different modes and measurement functions available on the instrument.
Defines and explains the various measured results obtained by the instrument.
Defines and explains the various measurement parameters available for configuration.
Defines parameters related to the instrument's hardware configuration and settings.
Defines auxiliary parameters for customizing the instrument's interface and behavior.
Defines parameters related to configuring and printing measurement reports.
Lists the basic input/output transmission types (functions) for remote control.
Explains how to send control setting codes and read current control state via serial interface.
Outlines the general structure of files generated by the SV 971A instrument.
Details the technical specifications of the SV 971A when operating as a Sound Level Meter.
Provides technical specifications for the SV 971A when operating as a 1/1 and 1/3 octave analyser.
Describes the frequency characteristics of the digital filters implemented in the instrument.
Details the specifications for the instrument's display, memory, and memory card.
Provides usage instructions for the SA 271A outdoor microphone kit and its operational modes.
Provides basic definitions of terms used in measurement results and calculations.
Defines and provides formulas for the Sound Level Meter (SLM) results.
Defines and provides formulas for additional results specific to the Dosimeter function.
Defines statistical levels (Ln) and explains how to determine them from cumulative density functions.
Introduces reverberation time and the factors influencing it, along with basic definitions.
Explains the definitions and calculation methods for EDT, RT20, and RT30 reverberation times.
Lists all the parts included in the SA 271A outdoor microphone kit.
Provides step-by-step instructions for assembling the SA 271A outdoor microphone kit.
Provides important notes regarding the usage and maintenance of the SA 271A kit and its components.
To Next Page
