Alarm is signalled on a special screen with flashing
frame and Alarm text inside and exceeded profiles
threshold.
For example, with such settings, the alarm screen will
look like this.
To exit the alarm screen, press any key.
In the Dose Meter function, next results are measured
and displayed: TIME, Lpeak, Lmax, Lmin, L, DOSE,
D_8h, PrDOSE, LAV, Leq, LE, SEL8, E, E_8h, LEPd,
PSEL, Ltm3, Ltm5, Ln, PTC, PTP, ULT, TWA,
PrTWA, Lc-a, EX, SD and OVL.
You can enable or disable results in the
Dosimeter results screen (path: <Menu> / Display /
Meas. Res. / Dosim. Res.).
The Leq & Lav position enables selecting the mode of
displaying the Leq and Lav results.
If Both is selected Leq and Lav are always displayed
together.
If Mutual Exclusive is selected, the rule is:
- for Exchange Rate equal to 3, Leq is
displayed and Lav is not;
- for Exchange Rate other than 3, Lav is
displayed and Leq is not.
To Next Page
Loading...
Need help?
General
