Svantek SV 971A - Display Parameters

SV 971A User Manual
133
Noise Mar.
Margin value to the calculated noise level for RT60
calculations: 0 ÷ 20 dB.
Chapter
12.2
Octave
Type of spectrum (1/1-octave or 1/3-octave) based
on which the RT60 analysis is performed.
Chapter
12.2
Freq. Range
Frequency range for RT60 calculations: 63Hz-4kHz
(7 bands) and 63Hz-8kHz (8 bands) for 1/1-octave;
50Hz-5kHz (21 bands) and 50Hz-10kHz (24 bands)
for 1/3 octave.
Chapter
12.2
Logger Name
Name of the Logger file in which data of the RT60
analysis will be recorded.
Chapter
12.2
Level
Threshold level of the sound source for triggering
the RT60 measurement. If the measured sound is
below the Level value, the RT60 measurement will
not start.
Chapter
12.2
17.5 DISPLAY PARAMETERS
Name
Description
Screen
Reference
Display
Section of the Main Menu that enables setting of the
measurement views.
Chapter
5
Display Mode
Mode of measurement results presentation - view.
Views can be activated in the Display Modes
screen.
Chapter
5.1