To Next PageTo Next Page
Need help?Do you have a question about the Svantek SV 104 and is the answer not in the manual?
General| Frequency Weightings | A, C, Z |
|---|---|
| Battery | Rechargeable Li-Ion battery |
| Operating Temperature | -10 °C to +50 °C |
| Microphone | 1/2" microphone |
| Time Weightings | Fast, Slow, Impulse |
| Measurement Parameters | Leq, SEL, Peak, Max, Min |
| Data Logging | Leq, Lmax, Lmin, Peak |
| Audio Recording | Yes, WAV format |
| Data Storage | SD card |
| Interface | USB |
| Power Supply | USB |
Details the general steps and considerations for performing noise measurements with the dosimeter.
Provides a concise list of the technical specifications and features of the SV104 dosimeter.
Introduces how to navigate and control the instrument using its keypad.
Explains the basic functions of the instrument's control buttons.
Details the alternative functions accessed via long-press on control buttons.
Describes functionalities accessed by pressing two keys simultaneously.
Provides instructions on how to charge the SV104 dosimeter's internal batteries.
Explains the procedure for powering the SV104 dosimeter on and off.
Details how to check the battery status and remaining charge of the instrument.
Guides the user through loading and applying measurement setup configurations.
Explains the process of calibrating the SV104 dosimeter for accurate measurements.
Explains how to start and stop a measurement session on the instrument.
Explains how to lock the keypad and display to prevent unauthorized access or tampering.
Details how to navigate and inspect measurement parameters in real-time or stopped mode.
Covers procedures for system and hardware resets to resolve instrument issues.
Guides the user through the installation and connection of the Supervisor software to the PC.
Details how to customize and save instrument configuration settings using the Supervisor software.
Describes the process of downloading, modifying, and uploading configuration setup files.
Explains how to configure specific acoustic measurement profiles for the dosimeter.
Details how to set measurement parameters such as start delay and integration period.
Covers the creation and customization of measurement reports using sessions.
Offers solutions for common problems encountered with the SV104 dosimeter.
