Svantek SV 104 User Manual

SV 104 USER'S MANUAL_DRAFT_______________________________________________
_
24
3.9.2 Primary “ONE-RESULT” parameters view mode
The one result mode is always available in all measurement modes, and cannot be disabled. In one
result mode any measurement result, selected via <SCROLL> , may be presented. The user may
change the actual profile view by pressing <PROFILE> key. This view mode is useful if in low vision
conditions or is suitable for operators with some visual impairment.
Figure 3-11 Primary parameters view mode screen
3.9.3 RESULTS LIST view mode
To get information about a number of results at one time it is handy to switch to the “results list” view
mode. Up to three parameters at a time are accessible for the operator.
Figure 3-12 Results list view mode screens
acronym for:
weighting filter: A,C,Z
detector type: Fast, Slow, Impulse
measured parameter name
acoustic profile number
profile preset name
parameter value
current criteria status bar:
THreshold, Exchange Rate, CRiterion level
measured parameters name
acoustic profile number
parameter values
configuration line
THreshold,
Exchange Rate,
CRiterion level
profile preset name

Svantek SV 104 Specifications

General

Brand	Svantek
Model	SV 104
Category	Measuring Instruments
Language	English