Svantek SV 104 User Manual

SV 104 USER'S MANUAL_DRAFT_______________________________________________
_
46
5.4.2 Profile settings tab
The main settings where specific acoustic profile configuration can be set are located under
“Dosimeter” tab. There are already predefined presets in each profile column. By choosing predefined
configuration some obvious fields will be automatically greyed. Others must be setup by the user.
There are three additional user defined presets, whose name can be changed during configuration
with use of the little icon (notes with a pen) which is then enabled.
Apart from alarm DOSE threshold there are three additional source of warning alarm, which can be
set. See figure below.
Figure 5-7 Dosimeter settings - profile configuration tab
Notice: Note, that some profiles can be disabled to be seen later during measurement run
(see chapter 5.4.5)
change user
defined preset
name
change additional
source of alarm

Svantek SV 104 Specifications

General

Brand	Svantek
Model	SV 104
Category	Measuring Instruments
Language	English