Need help?Do you have a question about the Svantek SVAN 971 and is the answer not in the manual?
General| Brand | Svantek |
|---|---|
| Model | SVAN 971 |
| Category | Measuring Instruments |
| Language | English |
Description of the function and operation of the front panel control keys.
Details on the instrument's input and output connectors.
Information on powering the instrument using batteries or USB.
Initial steps for turning on and starting measurements with the instrument.
Selection and description of the instrument's measurement functions.
Procedures for calibrating the instrument's measurement channel.
Setting up general measurement parameters like delay and integration period.
Configuration of measurement triggers based on level or gradient.
Configuration of data logging functions and parameters.
Setting up the instrument for automatic measurement start/stop.
Operations for managing logger files and directories.
Functions for saving, deleting, and loading setup files.
Selection between Start/Stop, Simple, and Advanced user interfaces.
Setting and programming the instrument's internal Real Time Clock.
Procedure to restore the instrument to its default factory settings.
Initiating the printing of measurement results to a printer or PC.
Activating the 1/1 or 1/3 octave analysis measurement function.
Setting general measurement parameters for octave analysis.
Switching the instrument to the Dosimeter measurement mode.
Configuring general parameters for Dosimeter measurements.
Configuring parameters specific to each measurement profile.
Programming alarm thresholds for Dosimeter measurement results.
Enabling and selecting results for logging in the logger file.
Information on instrument power sources and battery replacement.
Procedure for handling the micro SD memory card.
Instructions for performing system and hardware resets.
Procedure for updating the instrument's firmware.
Common issues and solutions for instrument problems.
Detailed technical specifications for SVAN 971 in SLM mode.
To Next Page
