Svantek SVAN 971 - Function #9 - Write - in the Data File into the Internal Flash - Disc

SVAN 971 User Manual – Appendixes
112
#7,SS;
This function creates setup file based on the current settings. The function returns #7,SS;
#7,SL;
This function returns all statistical levels in the format #7,SL,sl1,sl2,sl3,sl4,sl5,sl6,sl7,sl8,sl9,sl10;
#7,SL,sl_index,sl_level;
This function sets statistical levels where sl_index is the statistical index, sl_level is the statistical
level and returns the following sequence of characters: #7,SL;
#7,TP;
This function returns the temperature in preamplifier.
#7,UF;
This function returns usb speed in the format #7,UF,x;
#7, UF,x;
This function sets usb full speed (12Mbps, x = 1 ) or sets usb high speed (480Mbps, x = 0 ) and
returns the following sequence of characters: #7,UF;
#7,US;
This function returns unit subversion.
#7,UV;
This function returns usb voltage in 10 mV.
#7,WD;
This function returns windscreen compensation in the format #7,WD,x;
#7,WD,x;
This function enables ( x = 1 ) or disables ( x = 0 ) the windscreen compensation and returns
the following sequence of characters: #7,WD;
#7,VB;
This function returns the Bootstrap software version.
#7,VH;
This function returns the Hardboot software version.
For the unknown function and/or in the case of the other error, all these functions return the following
sequence of characters: #7,?;
A.9 FUNCTION #9 - WRITE-IN THE DATA FILE INTO THE INTERNAL FLASH-DISC
#9 function enables the user to write-in the data file into the internal Flash-disc memory.
The data file formats are given in Appendix B.
#9 function formats are defined as follows:
#9,FILE_TYPE,FILE_LENGTH,DATA