Svantek SVAN 971 - Page 111

SVAN 971 User Manual – Appendixes
111
p5 – Day,
p6 – Month,
p7 – Year,
p8 – Degree part of latitude,
p9 – Minutes part of latitude,
p10 – Seconds part of latitude,
p11 – Milliseconds part of latitude,
p12 – Latitude direction: N, S,
p13 – Degree part of longitude,
p14 – Minutes part of longitude,
p15 – Seconds part of longitude,
p16 – Milliseconds part of longitude,
p17 – Longitude direction: E, W,
p18 – Altitude in meters,
p19 – Decimal part of altitude,
p20 – Speed * 100 (km/h),
Response format:
#7,MG;
#7,NS;
This function returns number of sectors on SD-card (-1 denotes no SD-card). Sector size is 512B.
#7,NF;
This function returns number of free sectors on SD-card (-1 denotes no SD-card). Sector size is
512B.
#7,OD;
This function returns outdoor compensation in the format #7,OD,x;
#7,OD,x;
This function enables ( x = 1(enviroment), x = 2(airport) ) or disables ( x = 0 ) the outdoor compensation
and returns the following sequence of characters: #7,OD;
#7,PI;
This function returns PIC version.
#7,PO;
This function powers off the instrument.
#7,RT;
This function returns current real time clock settings in the format: #7,RT,hh,mm,ss,DD,MM,YYYY;
where hh:mm:ss denotes the time and DD/MM/YYYY gives the date.
#7,RT,hh,mm,ss,DD,MM,YYYY;
This function sets the current real time clock and returns the following sequence of characters:
#7,RT;