You may include (Print) or exclude (Off) results for each profile (Profile x) from
the report.
You may exclude all main results (Results) from the report (Off), include them
all (Print All) or select results for the report (Pr.Selected). In the last case the
Results position appears in the Report menu.
You may exclude all statistics (Statistics) from the report (Off), include them all
(Print All) or select essential statistics for the report (Pr.Selected). In the last
case the Statistics position appears in the Report menu.
In case of 1/1-octave or 1/3-octave analysis functions, you may also exclude all
Leq, Lmax, Lmin and Lpeak spectra (positions: Leq Spect., Lmax Spect.,
Lmin Spect., Lpeak Spect.) from the report (Off), include to the report all bands
of 1/1 or 1/3 spectra (Print All) or selected bands (Pr.Selected). In the last case
the Specrtum position appears in the Report menu.
You may include (Print) units of the results or exclude them (Off) from the report.
9.3 SELECTING RESULTS FOR THE REPORT – RESULTS
The Results position allows you to select results to be
included in the report for the selected profiles: Lpeak,
Lmax, Lmin, L, DOSE, D_8h, PrDOSE, LAV, Leq, LE,
SEL8, E, E_8h, Lden, LEPd, PSEL, Ltm3, Ltm5, PTC,
PTP, ULT, TWA, PrTWA, Lc-a, LR1, LR2 and OVL.
9.4 SELECTING STATISTICS FOR THE REPORT – STATISTICS
The Statistics position allows you to select statistic
levels from N1 to N10 to be included in the report.
9.5 SELECTING SPECTRA FOR THE REPORT – SPECTRUM
The Spectrum position allows you to select based on
their central frequencies the 1/1- or 1/3-octave bands
which will be included in the report for the Leq, Lmax,
Lmin and Lpeak spectra.
To Next Page
Loading...
Need help?
General
