Note: With the use of SvanPC++ software it is very easy to check if there are any new firmware
releases available for download.
16.6 PRESERVATION OF INTERNAL BATTERIES
• To preserve the life of the internal batteries, it is recommended that the instrument is turned off
when it is stored. In case of alkaline batteries, it is recommended to extract them out of the
instrument.
• When the instrument is turned off, it still draws a small amount of battery power. Therefore,
it is recommended to charge rechargeable cells every few months if it is not going to be used
regularly.
16.7 TRANSPORTATION AND STORAGE
For transportation or storage purpose, we recommend using the packaging provided by the
manufacturer. In a potentially dirty industrial environment, it is advisable to use the carrying case
provided by the manufacturer such as waterproof case (SA 72) or pocket soft bag (SA 80), which ensure
excellent mechanical and environmental protection and long-term storage conditions.
Clean the surface of the instrument with damp soft cloth.
The instrument sockets should be cleaned with the use of compressed air.
Note: In cases of larger dirt, such as oil or grease, contact your Local Authorized Distributor or
Svantek Service Office.
• In the case the instrument is not able to turn on connect the unit via USB to the power supply.
Then perform the hardware reset.
• In the case your instrument is switched on but does not respond to any key perform the hardware
reset.
• In the case the reset does not help call your Local Authorized Distributor or Svantek Service Office.
Should your SVANTEK professional measurement equipment need to be returned for repair or for
calibration, please contact the service office at the following number or contact via the SVANTEK
website.
Service Office: +48 (22) 51-88-320 or +48 (22) 51-88-322.
Office hours are 9:00 a.m. to 5:00 p.m. Central European Time.
E-mail: support@svantek.com.pl
office@svantek.com.pl
Internet: www.svantek.com
Address: SVANTEK Sp. z o.o.
Strzygłowska 81
04-872 Warszawa,
Poland